Kalamit Magnetic Separator

 

The “KALAMIT” series of magnetic separator for machine tool coolants is an economical choice. This "Green" filter requires no replacement filter media and can be helpful in reclaiming valuable ferrous metal solids.

The KALAMIT (Magnetic) filter separates magnetic particles from water based coolants and whole oils and can be used with oils up to a maximum viscosity of 20° cSt at 100°F (40°C). Filtration capacity is for flow ranges from 8 - 105.6 gpm (30 to 500 lt/min).

What makes the Kalamit Coolant Filter Different?

These magnetic separator are fabricated from a heavy duty galvanized sheet metal. All components are shaped by an automatic bending machine without welding and they are finished with a high quality powder coated finish for a long life.

They KALAMIT consists of a load-bearing frame equipped with a permanent magnet unit connected by a central shaft to a motor reduction unit. The magnetic separator is fitted with a sludge scraping blade and is slightly pitched on an inclination slide to aid in drying out the separated sludge.

The KALAMIT magnetic separator coolant filter includes the following elements: housing cover and flow breaking pre-chambers, tanks to collect the decontaminated liquids, an electric control panel, re-circulation pumps and numerous options are available. Micronfilter can offer a wide range of options and personalized solutions to satisfy the specific requirements of each client.

IMPROVE YOUR CUTTING TOOL LIFE AND YOUR FINISH QUALITY BY FILTERING YOUR COOLANT

 

How It Works;

The contaminated liquid flows into the coolant filter by gravity or by pressure into the magnetic separator (1). The jet breaker (2) evenly disperses the flow, as the contaminated fluid enters the separation chamber (3). The rotating magnet unit (4) collects the magnetic particles, which are subsequently removed by a special comb-blade (6), which also pushes the sludge (7) onto an adjustable slide (8). The cleaned liquid (5) passes to a containment tank.

The magnetic disk cleaner does not use disposable filtering elements and facilitates the differentiated waste disposal of the collected sludge.

coolant filter

coolant filter
Kalamit Range
   

TECHNICAL DETAILS

COOLANT FILTER MODEL

FLOW CAPACITY

Water based

FLOW CAPACITY

Oil

MOTOR SIZE
Gear Motor

HP (kw)

Kalamit 50 13.2 (50) 6.6 (25) 0.16 (012)
Kalamit 100 26.4 (100) 13.2 (50) 0.16 (012)
Kalamit 150 39.6 (150) 19.8 (75) 0.16 (012)
Kalamit 200 52.8 (200) 26.4 (100) 0.16 (012)
Kalamit 250 66 (250) 33 (125) 0.16 (012)
Kalamit 300 79.2 (300) 39.6 (150) 0.16 (012)
Kalamit 400 105.6 (400) 52.8 (200) 0.16 (012)
Kalamit 500 132 (500) 66 (250) 0.16 (012)
Kalamit 700 185 (700) 92.5 (350) 0.16 (012)
   
Easyband with Kalamit
An example of how the KALAMIT magnetic separator (1) fits right on the top of our Easyband or Evotech gravity bed filters to remove ferrous metal for enhanced scrap salvage or to extend the life of the filter media.

The Kalamit separator can be supplied on a tank with a pump as well.
An optional top cover is or a threaded inlet connector are available.
Kalamit Options
 

Get PDF

Contact: info@micronfilterusa.com

coolant filter main

 

Home Products Mist Collectors Microil KUBE Quad Elektra EcoTech Dry Dust Collectors Airjet Mini-Airjet Sharp Coolant Filters Easyband EvoTech Kalamit Maxflow Oil Clean Spin Custom Systems Bench Top Extractors Coolant Chller Downloads About Us Anouncements Contact Coolant filters  Custom coolant filters  Dust Collectors  Mist Collectors  Filter Finder