mist collector
Electrostatic Mist Collector

Electrostatic Mist Collector

MAXIMUM EFFICIENCY

High performance filtration efficiency of particles between 10 and 0.01 microns in size. EXCELLENT for SMOKE applications.

QUIET OPERATION

Due to the open cell design of the Elektra Electrostatic Mist Collector, this equipment can be used in any environment operating at less than 76 dBa.

OPTIONS

Depending on the application, the ELEKTRA Electrostatic Mist Collector can be equipped with vibration eliminators, remote mounted switch, manual fan control and a soundproof fan discharge box to further reduce noise.

 

mist collector The ELEKTRA Electrostatic Mist Collector series mist collectors have been designed for use on all machine tools using oil based coolants or lubricants. The product range consists of four basic models to provide from 235 scfm - 941 scfm (400 - 1,600 m3/H) of evacuation capacity. The ELEKTRA Electrostatic Mist Collector models are a good choice when a shop requires heavy smoke removal from aggressive cutting applications.

How It Works;

(1) Mist laden air and smoke is evacuated from the machine tool by a fan (7) located inside the ELEKTRA. (2) Mist and Smoke pass through a synthetic pre filter to remove large drops of oil and any large solids in the flow stream. (3) Oil mist impacts against the metal mesh filter further removing mist and liquid from the air stream. Large droplets are now separated as the air flow. (4 & 5) In a two stage electrostatic precipitator, there are two sections, a charging section (4) and a collection section (5). The charging section uses ionizer wires to place a positive charge to the incoming smoke, fume and dust particles. The charged particles are then drawn into a secondary electric field where they are collected on a series of metal plates (5). The clean air is exhausted through a grating located on the top of the machine (8). A soundproof enclosure can be supplied as an option to further reduce noise (6).

TECHNICAL DETAILS Electrostatic Mist Collector

MODEL

MAX. AIR FLOW

SCFM (m3/Hr)

MOTOR SIZE

HP (kw)

NOISE LEVEL

dB

Elektra 400 235 (400) 0.25 (0.2) 68
Elektra 800 470 (800) 0.75 (0.55) 70
Elektra 1200 706 (1200) 1 (0.75) 74
Elektra 1600 941 (1600) 1.5 (1.1) 76
Elektra Options
1 Vibration Eliminators
2 Remote On/Off Switch
3 Manual Fan Control
4 Reducers & Inlet Adapters
5 Air Flow Control Damper
6 Hose Clamps
7 Inlet Duct & Drain Hose
8 Soundproof Enclosure

Get PDF

Contact: info@micronfilterusa.com

 

mist collector main

Home Products Mist Collectors Microil KUBE Quad Elektra EcoTech Dry Dust Collectors Airjet Mini-Airjet Sharp Coolant Filters Easyband EvoTech Kalamit Maxflow Oil Clean Spin Custom Systems Bench Top Extractors Coolant Chller Downloads About Us Anouncements Contact Coolant filters  Custom coolant filters  Dust Collectors  Mist Collectors  Filter Finder